Manufacturing process ofheat sink skiving machine

The heat sink skiving machine uses a single piece of material (such as copper or aluminum) and uses high chipping precision cutting technology to cut high-density fins, high fins and ultra-long radiator structures through a dedicated chipper. The fin-type radiator breaks through the limitations of the radiator, and its thickness and length ratio are the same as the conventional radiator, and high-density radiator can be produced. The fin and the base are "one piece". The efficiency of the wiper radiator is twice that of the traditional radiator because there is no connected wiper radiator and high-purity materials. The heat transfer efficiency can reach 100%.

The manufacture of heat sink skiving machines requires mature chipped heat sink production technology, advanced large chipped heat sink machine tools and technical cooperation of engineers. The specific production process is as follows:

1. Customize a suitable contour according to the design size of the heat sink, and then place the contour on the heat sink machine in the correct operation mode.

2. Set the parameters of the chip fin machine, and input the data of the chip fin that needs to be produced, such as fin spacing, fin height and fin thickness.

3. Start the fin cutting machine, the engineer monitors the machine, checks whether the semi-finished product meets the data requirements, and makes abnormal adjustments.

4. Processing, deburring, tapping, etc. on the cut semi-finished chip radiator.

5. Cut the semi-finished chip radiator into the specified design size.

6. If there is an embedded heat pipe design on the design drawing, heat pipe grooving, pressure, epoxy welding and other treatments should be carried out on the back of the cut radiator.

7. Complete the entire production process by packaging the finished heat sink skiving machine.