High performance Skived Fin Heat Sinks

Skived fin heat sinks are made from raw metal block where fins are literally carved out of the heat sink base by a special blade tool. Since both fins and base are shaped from a single piece of raw metal block, skived fin heat sink are considered to be the best thermal conductivity between fins and base. Skiving method typically is used for aluminum and copper heat sink. Although it could be more costly than extrusion, skiving method is an ideal manufacturing method for prototyping and high performance applications and offers a superior heat dissipation.

Skived fin heat sinks offerhighly optimized cooling as they allow for higher fin densities than what is manufacturable using extrusion methodologies, but do not have an interface joint that restricts heat flow like bonded or brazed fin heat sinks. Unlike bonded or brazed heat sinks, Skived Fin Heat Sinks are constructed from a single piece of material and offer reduced thermal resistance since there is no joint between a base and fins. These heat sinks are manufactured by precisely slicing the top of the base, called skiving, folding it back to where it is perpendicular to the base, and repeating at regular intervals to create fins.
The skiving process enables high fin density and thin fin heat sink geometries for optimal thermal performance. By packing as much fin surface area into a given volume, Skived fin heat sinks have greater heat transfer than other single piece construction heat sinks such as extruded aluminum heat sinks. Compared to extruded aluminum, skived fin heat sink fabrication does not rely on expensive tooling, providing greater design flexibility and faster prototyping. Instead, each fin is cut separately using the same tool which allows for lower tooling costs.